[Fot] pilot bushing

[norlinengineering]

I did the same with grease and a universal pilot tool.  Wrapped the closest bushing with duct tape until it was a close fit.  Made a mess with grease everywhere, but it worked



Sent from my Verizon Wireless 4G LTE smartphone

-------- Original message --------
From: Duncan Charlton <duncan.charlton54 at gmail.com> 
Date: 08/16/2015  4:30 PM  (GMT-08:00) 
To: kkjjk at aol.com 
Cc: "<fot at autox.team.net>" <fot at autox.team.net> 
Subject: Re: [Fot] pilot bushing 

I happened to have an 8” length of dowel that was almost the exact diameter of the bushing.  I packed the bushing hole full of grease and drove the dowel in with a mallet.  The hydraulic pressure is plenty to move the pilot bush out.
Hadn’t heard of the toiled paper method!
Duncan

On Aug 16, 2015, at 3:37 PM, kkjjk at aol.com wrote:
Hello all-  Any advice on how to remove a GT6 pilot bushing?  The flywheel is removed and the engine is still in the car?  Thanks-- Jay De Pol_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/duncan.charlton54@gmail.com



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20150816/da2986a1/attachment-0001.htm>