[Fot] pilot bushing

[Glenn Franco]

I have an otc slide hammer with a selection of expandable internal pilot 
bits. You can also use a shaft the size of the pilot hole and fill the 
cavity with grease, force the shaft into the pilot hole and it may be 
forced out. You can thread the pilot bearing and use a slide hammer on 
the end of the bolt and pull it out.
Take your choice
Glenn

On 8/16/2015 4:37 PM, kkjjk at aol.com wrote:
> Hello all-  Any advice on how to remove a GT6 pilot bushing?  The 
> flywheel is removed and the engine is still in the car?  Thanks-- Jay 
> De Pol
>
>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/gaf3@charter.net
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20150816/be647914/attachment-0001.htm>