[Fot] TR4 brake bias lever

[william r tobin]

Check out fedhillusa.com to get a primer on brake fittings and lines. They 
have a good website and lots of info. Very helpful tech line.
I've gone to copper-nickle alloy brake lines; easy to flare and form, and 
don't rust. A little more $ but worth it.
NFI.
Bill
----- Original Message ----- 
From: <toodamnfunky at comcast.net>
To: "fot" <fot at autox.team.net>
Sent: Friday, June 15, 2012 12:46 PM
Subject: [Fot] TR4 brake bias lever


> FoT
>
> I'm adding a brake bias lever to the car which is mounted to the right 
> side of the drivers seat.
>
> I will tap into the rear circuit at the rear line splitter.
>
> I've heard the term " Girling style bubble flair " before, I know my 
> flaring tool does the SAE double flair.
>
> Can someone enlighten me on English style bubble flairs please.
>
> Thanks as always,
>
> Jim g
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/fot/william.tobin31@verizon.net