[Fot] Rod ends source (Heim Joints)

[Greg - Lunker Hilyer]

Including the USA according to the box they come in.

Greg "Lunker" Hilyer
TR4 #314
Albuquerque NM
On Sep 16, 2008, at 11:25 AM, Bill Babcock wrote:

> I would use those on non-critical applications. Napa sources from  
> everywhere these days.
> On Sep 16, 2008, at 10:24 AM, Greg - Lunker Hilyer wrote:
>
>> Any NAPA store. If not in stock, they are in their catalog and can be
>> had in a couple days.
>>
>> Greg "Lunker" Hilyer
>> TR4 #314
>> Albuquerque NM
>> On Sep 16, 2008, at 10:55 AM, Russ Moore wrote:
>>
>>> I am looking for some left and right hand threaded male type Heim
>>> joints. Any suggestions other than Pegasus or Summit?
>>>
>>>
>>>
>>> I am looking for male joints with a ½” UNF thread (L & R) and a
>>> 3/8” hole in the swivel portion. I also am going to need jamb nuts
>>> and high base nuts for welding on some tubes. (radius rods for a
>>> Spitfire)
>>>
>>>
>>>
>>> Thanks
>>>
>>> Russ Moore
>>>
>>> Spitfire #49
>>>
>>> _______________________________________________
>>> http://www.team.net/donate.html
>>>
>>> Fot mailing list
>>> Fot at autox.team.net
>>> http://autox.team.net/mailman/listinfo/fot
>>>
>>
>> _______________________________________________
>> http://www.team.net/donate.html
>>
>> Fot mailing list
>> Fot at autox.team.net
>> http://autox.team.net/mailman/listinfo/fot
>>
>
> Bill Babcock
> Babcock & Jenkins
> Billb at bnj.com
> 503.936.7660
> www.bnj.com
>
> Editor
> Ke Nalu e-Magazine
> Paddlesurfing's Web Journal
>
> Bill at kenalu.com
> www.kenalu.com
> blog: www.ponohouse.com/ponoblog
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20080916/81f72a05/attachment-0003.htm>