[Fot] Rod ends source (Heim Joints)

[Bill Babcock]

I would use those on non-critical applications. Napa sources from  
everywhere these days.
On Sep 16, 2008, at 10:24 AM, Greg - Lunker Hilyer wrote:

> Any NAPA store. If not in stock, they are in their catalog and can be
> had in a couple days.
>
> Greg "Lunker" Hilyer
> TR4 #314
> Albuquerque NM
> On Sep 16, 2008, at 10:55 AM, Russ Moore wrote:
>
>> I am looking for some left and right hand threaded male type Heim
>> joints. Any suggestions other than Pegasus or Summit?
>>
>>
>>
>> I am looking for male joints with a ½” UNF thread (L & R) and a
>> 3/8” hole in the swivel portion. I also am going to need jamb nuts
>> and high base nuts for welding on some tubes. (radius rods for a
>> Spitfire)
>>
>>
>>
>> Thanks
>>
>> Russ Moore
>>
>> Spitfire #49
>>
>> _______________________________________________
>> http://www.team.net/donate.html
>>
>> Fot mailing list
>> Fot at autox.team.net
>> http://autox.team.net/mailman/listinfo/fot
>>
>
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>

Bill Babcock
Babcock & Jenkins
Billb at bnj.com
503.936.7660
www.bnj.com

Editor
Ke Nalu e-Magazine
Paddlesurfing's Web Journal

Bill at kenalu.com
www.kenalu.com
blog: www.ponohouse.com/ponoblog

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20080916/efa114ee/attachment-0003.htm>