[Fot] Rod ends source (Heim Joints)

[fubog1 at aol.com]

Unless they have changed, the NAPA are junk...
Glen

-----Original Message-----
From: Greg - Lunker Hilyer <lunkercars at earthlink.net>
To: Russ Moore <rem9 at frontiernet.net>
Cc: fot at autox.team.net
Sent: Tue, 16 Sep 2008 1:24 pm
Subject: Re: [Fot] Rod ends source (Heim Joints)

Any NAPA store. If not in stock, they are in their catalog and can be
had in a couple days.

Greg "Lunker" Hilyer
TR4 #314
Albuquerque NM
On Sep 16, 2008, at 10:55 AM, Russ Moore wrote:

> I am looking for some left and right hand threaded male type Heim
> joints. Any suggestions other than Pegasus or Summit?
>
>
>
> I am looking for male joints with a ½” UNF thread (L & R) and a
> 3/8” hole in the swivel portion. I also am going to need jamb nuts
> and high base nuts for welding on some tubes. (radius rods for a
> Spitfire)
>
>
>
> Thanks
>
> Russ Moore
>
> Spitfire #49
>
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>

_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot