[Bricklin] HVAC blower mismatch

[Pugs]

Look at the brick line article Ron from Arizona wrote on how he fixed it. Lots
of pics.

Pugs Pivirotto

> On Apr 10, 2014, at 7:27 PM, Scott Isensee <isensee at aol.com> wrote:
>
> Terry's old kit was just 2 or 3 brackets that would be easy to fabricate.
> Otherwise you can at least use duct tape or something to bridge the gap
> between the two boxes so it at least doesn't leak, but you will still lose
> some air flow due to the misalignment. The best fix is to move the boxes to
> where they align. Have you checked with Bob's Brickyard to see if he has a
kit
> like Terry's?
>
>
> Scott
>
>
>
> -----Original Message-----
> From: Brett Kelsey <brett.kelsey at comcast.net>
> To: Bricklin <Bricklin at autox.team.net>
> Sent: Thu, Apr 10, 2014 7:23 pm
> Subject: [Bricklin] HVAC blower mismatch
>
>
> I have the Dash off in order to replace the heater core and would like to
do
> something with the misaligned blower. I thought Terry had a kit or
something
> to patch it but when I spoke with his shop in Virginia I was told they were
> working on a new design that wasn't ready to sell yet. Has anyone come up
> with a good fix? I'm thinking of making something  using  2 or 3mm thick
> plastic pieces.
> _______________________________________________
> Bricklin at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/bricklin/isensee@aol.com
> _______________________________________________
> Bricklin at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/bricklin/pugsracer@comcast.net