[Bricklin] HVAC blower mismatch

[Scott Isensee]

Terry's old kit was just 2 or 3 brackets that would be easy to fabricate.
Otherwise you can at least use duct tape or something to bridge the gap
between the two boxes so it at least doesn't leak, but you will still lose
some air flow due to the misalignment. The best fix is to move the boxes to
where they align. Have you checked with Bob's Brickyard to see if he has a kit
like Terry's?


 Scott



-----Original Message-----
From: Brett Kelsey <brett.kelsey at comcast.net>
To: Bricklin <Bricklin at autox.team.net>
Sent: Thu, Apr 10, 2014 7:23 pm
Subject: [Bricklin] HVAC blower mismatch


I have the Dash off in order to replace the heater core and would like to do
something with the misaligned blower. I thought Terry had a kit or something
to patch it but when I spoke with his shop in Virginia I was told they were
working on a new design that wasn't ready to sell yet. Has anyone come up
with a good fix? I'm thinking of making something  using  2 or 3mm thick
plastic pieces.
_______________________________________________
Bricklin at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/bricklin/isensee@aol.com