[6pack] 6pack Digest, Vol 81, Issue 7

Wed Nov 24 09:47:03 MST 2021

They don't give those away, do they Dave?

Dave

On Wed, Nov 24, 2021 at 11:25 AM DAVID MASSEY <dave1massey at cs.com> wrote:

> You mean something like this:
>
>
> https://www.mcmaster.com/universal-joints/constant-velocity-single-u-joints/
>
>
> Dave
>
>
>
> -----Original Message-----
> From: Patrick Bloem <patrick.bloem at sbcglobal.net>
> To: 6pack at autox.team.net <6pack at autox.team.net>
> Sent: Wed, Nov 24, 2021 9:53 am
> Subject: Re: [6pack] 6pack Digest, Vol 81, Issue 7
>
> Many years ago I replaced my throttle linkages with a helical Flexures
> that here being used on Indy Car engines. Not sure where you can get them
> but I was doinf business with them back in the 90's and got same samples
> that have worked great to this day. They are located in Ontario, CA. HC
> Pacific <https://helicalcouplings.com/helical-u-joints.aspx>
>
> HC Pacific
> Helical U-Joints from HC Pacific. Contact us for quantity discounts.
> <https://helicalcouplings.com/helical-u-joints.aspx>
>
>
>
> J. Patrick Bloem
> 9168 TR250
> 1973 TR6
>
>
> On Wednesday, November 24, 2021, 09:40:53 AM EST,
> 6pack-request at autox.team.net <6pack-request at autox.team.net> wrote:
>
>
> Send 6pack mailing list submissions to
>     6pack at autox.team.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
>     http://autox.team.net/mailman/listinfo/6pack
> or, via email, send a message with subject or body 'help' to
>     6pack-request at autox.team.net
>
> You can reach the person managing the list at
>     6pack-owner at autox.team.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of 6pack digest..."
>
>
> Today's Topics:
>
>   1. Re: Throttle Linkage ?S? Connectors (Tomislav Marincic)
>   2. Re: Throttle Linkage ?S? Connectors (rmf3860 rmf3860)
>   3. Re: Throttle Linkage ?S? Connectors (Jim Jones)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 24 Nov 2021 12:35:53 +0000
> From: Tomislav Marincic <tomislav.marincic at earthlink.net>
> To: robertrudolphi at yahoo.com, 6pack at autox.team.net
> Subject: Re: [6pack] Throttle Linkage ?S? Connectors
> Message-ID: <7018a786-b1bf-d48d-329c-a523ebe9a879 at earthlink.net>
> Content-Type: text/plain; charset=utf-8
>
> Hello Robert,
> ?
> I'll snap you a photo of the barrel linkage in place. One of them works,
> but if I recall correctly, there was no way to use two and get them
> installed without removing the carbs?and linkage.
> ?
> I Jet Hot coated both of my manifolds, and wrapped the exhaust header in
> Thermo-Tec?exhaust tape. The Jet Hot keeps the manifolds looking nice, and
> keeps the header from corroding, but it won't cure your fuel cook-off
> problems. Your best bet is one of Joe Alexander's heat shields, which I
> think are being sold through Moss as well. https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE
> (
> https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE
> )
> ?
> https://www.summitracing.com/parts/the-11021?rrec=true (
> https://www.summitracing.com/parts/the-11021?rrec=true)
> ?
> Good Luck, Tom
> ?
> ?
> ?
> ?
> -----Original Message-----
> From: robert rudolphi
> Sent: Nov 23, 2021 1:23 PM
> To: 6pack at autox.team.net , Tomislav Marincic
> Subject: Re: [6pack] Throttle Linkage ?S? Connectors
> ?
> To follow up on this I am having my carbs rebuilt this winter (Joe Curto)
> and was thinking about have the intake and stock exhaust manifolds Jet
> coated. I am trying to reduce hard starting when hot. Would also like to
> get the throttle linkages re-plated/refinished and was wondering what is
> the best way to go?
> ?
> Thanks in advance for any feedback
> ?
> Robert
> ?
> ?
> ?
> ?
> ?
> On Tuesday, November 23, 2021, 12:13:49 PM EST, Tomislav Marincic wrote:
> ?
> ?
> ?
> ?
> ?
> ?
> When I set up my dual ZS175?s I used new link clips from Roadster Factory.
> They quickly became distorted and introduced slop into the linkage.
> ?
> I?m currently using one SU link clip sourced from Richard Good, which is
> much sturdier and more rust-resistant than the ZS part. I?m also using a
> single rigid coupling that I sourced from Grainger. I forget why, but
> installing two shaft linkages was problematic, and the gap between carb
> throttle shafts was too wide to use two SU linkages.
> ?
> I might have one of each in my spares if you need them.
> ?
> https://www.grainger.com/search?searchQuery=nomar+clx-5-5-a&searchBar=true
> ?
> https://www.goodparts.com/product/folded-coupler-carb-shaft/
> ?
> Pix on request?Tom
> ?
> ?
> ?
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation? $12.96
> Archive: http://www.team.net/archive
> ?
> ?
> 6pack at autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
> ?
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/6pack/robertrudolphi@yahoo.com
> ?
>
> ?
>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 24 Nov 2021 07:49:10 -0600
> From: rmf3860 rmf3860 <bobfabie at gmail.com>
> To: Tomislav Marincic <tomislav.marincic at earthlink.net>
> Cc: 6pack at autox.team.net, robertrudolphi at yahoo.com
> Subject: Re: [6pack] Throttle Linkage ?S? Connectors
> Message-ID:
>     <CA+aQ7wzXnWC+nqdTPzCuXscm6Qph4Yypte_AfdEiMHbp=3=pHg at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Thanks Tom. I have a heat deflector. I bought it many years ago.
> Considering the slop in my throttle linkage, I decided to order a
> replacement from Richard at Goodparts.
>
> Bob Fabie
>
> On Wed, Nov 24, 2021 at 6:36 AM Tomislav Marincic <
> tomislav.marincic at earthlink.net> wrote:
>
> > Hello Robert,
> >
> > I'll snap you a photo of the barrel linkage in place. One of them works,
> > but if I recall correctly, there was no way to use two and get them
> > installed without removing the carbs and linkage.
> >
> > I Jet Hot coated both of my manifolds, and wrapped the exhaust header in
> > Thermo-Tec exhaust tape. The Jet Hot keeps the manifolds looking nice,
> and
> > keeps the header from corroding, but it won't cure your fuel cook-off
> > problems. Your best bet is one of Joe Alexander's heat shields, which I
> > think are being sold through Moss as well.
> >
> https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE
> > (
> >
> https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE
> > )
> >
> > https://www.summitracing.com/parts/the-11021?rrec=true (
> > https://www.summitracing.com/parts/the-11021?rrec=true)
> >
> > Good Luck, Tom
> >
> >
> >
> >
> > -----Original Message-----
> > From: robert rudolphi
> > Sent: Nov 23, 2021 1:23 PM
> > To: 6pack at autox.team.net , Tomislav Marincic
> > Subject: Re: [6pack] Throttle Linkage ?S? Connectors
> >
> > To follow up on this I am having my carbs rebuilt this winter (Joe Curto)
> > and was thinking about have the intake and stock exhaust manifolds Jet
> > coated. I am trying to reduce hard starting when hot. Would also like to
> > get the throttle linkages re-plated/refinished and was wondering what is
> > the best way to go?
> >
> > Thanks in advance for any feedback
> >
> > Robert
> >
> >
> >
> >
> >
> > On Tuesday, November 23, 2021, 12:13:49 PM EST, Tomislav Marincic wrote:
> >
> >
> >
> >
> >
> >
> > When I set up my dual ZS175?s I used new link clips from Roadster
> Factory.
> > They quickly became distorted and introduced slop into the linkage.
> >
> > I?m currently using one SU link clip sourced from Richard Good, which is
> > much sturdier and more rust-resistant than the ZS part. I?m also using a
> > single rigid coupling that I sourced from Grainger. I forget why, but
> > installing two shaft linkages was problematic, and the gap between carb
> > throttle shafts was too wide to use two SU linkages.
> >
> > I might have one of each in my spares if you need them.
> >
> >
> https://www.grainger.com/search?searchQuery=nomar+clx-5-5-a&searchBar=true
> >
> > https://www.goodparts.com/product/folded-coupler-carb-shaft/
> >
> > Pix on request?Tom
> >
> >
> >
> > _______________________________________________
> > Support Team.Net http://www.team.net/donate.html
> > Suggested annual donation  $12.96
> > Archive: http://www.team.net/archive
> >
> >
> > 6pack at autox.team.net
> > http://autox.team.net/mailman/listinfo/6pack
> >
> > Unsubscribe/Manage:
> > http://autox.team.net/mailman/options/6pack/robertrudolphi@yahoo.com
> >
> >
> >
> > _______________________________________________
> > Support Team.Net http://www.team.net/donate.html
> > Suggested annual donation  $12.96
> > Archive: http://www.team.net/archive
> >
> >
> > 6pack at autox.team.net
> > http://autox.team.net/mailman/listinfo/6pack
> >
> > Unsubscribe/Manage:
> > http://autox.team.net/mailman/options/6pack/bobfabie@gmail.com
> >
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://autox.team.net/pipermail/6pack/attachments/20211124/ed838233/attachment-0001.htm
> >
>
> ------------------------------
>
> Message: 3
> Date: Wed, 24 Nov 2021 14:39:50 +0000 (UTC)
> From: Jim Jones <jimjcmo at yahoo.com>
> To: Tomislav Marincic <tomislav.marincic at earthlink.net>,
>     <robertrudolphi at yahoo.com>,  <6pack at autox.team.net>
> Subject: Re: [6pack] Throttle Linkage ?S? Connectors
> Message-ID: <385333468.2961619.1637764790031 at mail.yahoo.com>
> Content-Type: text/plain; charset="utf-8"
>
> I have a new exhaust shield available if anyone would want it. Email me
> for price if you?re interested.
> Jim JonesFormer ?72 6 owner
>
>
> Sent from Yahoo Mail for iPad
>
>
> On Wednesday, November 24, 2021, 6:36 AM, Tomislav Marincic <
> tomislav.marincic at earthlink.net> wrote:
>
> Hello Robert,
> ?
> I'll snap you a photo of the barrel linkage in place. One of them works,
> but if I recall correctly, there was no way to use two and get them
> installed without removing the carbs?and linkage.
> ?
> I Jet Hot coated both of my manifolds, and wrapped the exhaust header in
> Thermo-Tec?exhaust tape. The Jet Hot keeps the manifolds looking nice, and
> keeps the header from corroding, but it won't cure your fuel cook-off
> problems. Your best bet is one of Joe Alexander's heat shields, which I
> think are being sold through Moss as well. https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE
> (
> https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE
> )
> ?
> https://www.summitracing.com/parts/the-11021?rrec=true (
> https://www.summitracing.com/parts/the-11021?rrec=true)
> ?
> Good Luck, Tom
> ?
> ?
> ?
> ?
> -----Original Message-----
> From: robert rudolphi
> Sent: Nov 23, 2021 1:23 PM
> To: 6pack at autox.team.net , Tomislav Marincic
> Subject: Re: [6pack] Throttle Linkage ?S? Connectors
> ?
> To follow up on this I am having my carbs rebuilt this winter (Joe Curto)
> and was thinking about have the intake and stock exhaust manifolds Jet
> coated. I am trying to reduce hard starting when hot. Would also like to
> get the throttle linkages re-plated/refinished and was wondering what is
> the best way to go?
> ?
> Thanks in advance for any feedback
> ?
> Robert
> ?
> ?
> ?
> ?
> ?
> On Tuesday, November 23, 2021, 12:13:49 PM EST, Tomislav Marincic wrote:
> ?
> ?
> ?
> ?
> ?
> ?
> When I set up my dual ZS175?s I used new link clips from Roadster Factory.
> They quickly became distorted and introduced slop into the linkage.
> ?
> I?m currently using one SU link clip sourced from Richard Good, which is
> much sturdier and more rust-resistant than the ZS part. I?m also using a
> single rigid coupling that I sourced from Grainger. I forget why, but
> installing two shaft linkages was problematic, and the gap between carb
> throttle shafts was too wide to use two SU linkages.
> ?
> I might have one of each in my spares if you need them.
> ?
> https://www.grainger.com/search?searchQuery=nomar+clx-5-5-a&searchBar=true
> ?
> https://www.goodparts.com/product/folded-coupler-carb-shaft/
> ?
> Pix on request?Tom
> ?
> ?
> ?
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation? $12.96
> Archive: http://www.team.net/archive
> ?
> ?
> 6pack at autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
> ?
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/6pack/robertrudolphi@yahoo.com
> ?
>
> ?
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation? $12.96
> Archive: http://www.team.net/archive
>
>
> 6pack at autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/6pack/jimjcmo@yahoo.com
>
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://autox.team.net/pipermail/6pack/attachments/20211124/4fa9bbf6/attachment.htm
> >
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> 6pack mailing list
> 6pack at autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
>
> ------------------------------
>
> End of 6pack Digest, Vol 81, Issue 7
> ************************************
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
>
>
> 6pack at autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/6pack/dave1massey@cs.com
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
>
>
> 6pack at autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/6pack/forzion7@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/6pack/attachments/20211124/014df9b2/attachment-0001.htm>