[6pack] 6pack Digest, Vol 81, Issue 7

DAVID MASSEY dave1massey at cs.com
Wed Nov 24 09:25:34 MST 2021 

 You mean something like this:
https://www.mcmaster.com/universal-joints/constant-velocity-single-u-joints/
 
Dave 

 
 
-----Original Message-----
From: Patrick Bloem <patrick.bloem at sbcglobal.net>
To: 6pack at autox.team.net <6pack at autox.team.net>
Sent: Wed, Nov 24, 2021 9:53 am
Subject: Re: [6pack] 6pack Digest, Vol 81, Issue 7

Many years ago I replaced my throttle linkages with a helical Flexures that here being used on Indy Car engines. Not sure where you can get them but I was doinf business with them back in the 90's and got same samples that have worked great to this day. They are located in Ontario, CA. HC Pacific

| 
| 
| 
|  |  |

 |

 |
| 
|  | 
HC Pacific
Helical U-Joints from HC Pacific. Contact us for quantity discounts. |

 |

 |




J. Patrick Bloem9168 TR2501973 TR6 

    On Wednesday, November 24, 2021, 09:40:53 AM EST, 6pack-request at autox.team.net <6pack-request at autox.team.net> wrote:  
 
 Send 6pack mailing list submissions to
    6pack at autox.team.net

To subscribe or unsubscribe via the World Wide Web, visit
    http://autox.team.net/mailman/listinfo/6pack
or, via email, send a message with subject or body 'help' to
    6pack-request at autox.team.net

You can reach the person managing the list at
    6pack-owner at autox.team.net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of 6pack digest..."


Today's Topics:

  1. Re: Throttle Linkage ?S? Connectors (Tomislav Marincic)
  2. Re: Throttle Linkage ?S? Connectors (rmf3860 rmf3860)
  3. Re: Throttle Linkage ?S? Connectors (Jim Jones)


----------------------------------------------------------------------

Message: 1
Date: Wed, 24 Nov 2021 12:35:53 +0000
From: Tomislav Marincic <tomislav.marincic at earthlink.net>
To: robertrudolphi at yahoo.com, 6pack at autox.team.net
Subject: Re: [6pack] Throttle Linkage ?S? Connectors
Message-ID: <7018a786-b1bf-d48d-329c-a523ebe9a879 at earthlink.net>
Content-Type: text/plain; charset=utf-8

Hello Robert,
?
I'll snap you a photo of the barrel linkage in place. One of them works, but if I recall correctly, there was no way to use two and get them installed without removing the carbs?and linkage.
?
I Jet Hot coated both of my manifolds, and wrapped the exhaust header in Thermo-Tec?exhaust tape. The Jet Hot keeps the manifolds looking nice, and keeps the header from corroding, but it won't cure your fuel cook-off problems. Your best bet is one of Joe Alexander's heat shields, which I think are being sold through Moss as well. https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE (https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE)
?
https://www.summitracing.com/parts/the-11021?rrec=true (https://www.summitracing.com/parts/the-11021?rrec=true)
?
Good Luck, Tom
?
?
?
?
-----Original Message-----
From: robert rudolphi 
Sent: Nov 23, 2021 1:23 PM
To: 6pack at autox.team.net , Tomislav Marincic 
Subject: Re: [6pack] Throttle Linkage ?S? Connectors
?
To follow up on this I am having my carbs rebuilt this winter (Joe Curto) and was thinking about have the intake and stock exhaust manifolds Jet coated. I am trying to reduce hard starting when hot. Would also like to get the throttle linkages re-plated/refinished and was wondering what is the best way to go?
?
Thanks in advance for any feedback
?
Robert
?
?
?
?
?
On Tuesday, November 23, 2021, 12:13:49 PM EST, Tomislav Marincic wrote:
?
?
?
?
?
?
When I set up my dual ZS175?s I used new link clips from Roadster Factory. They quickly became distorted and introduced slop into the linkage.
?
I?m currently using one SU link clip sourced from Richard Good, which is much sturdier and more rust-resistant than the ZS part. I?m also using a single rigid coupling that I sourced from Grainger. I forget why, but installing two shaft linkages was problematic, and the gap between carb throttle shafts was too wide to use two SU linkages.
?
I might have one of each in my spares if you need them.
?
https://www.grainger.com/search?searchQuery=nomar+clx-5-5-a&searchBar=true
?
https://www.goodparts.com/product/folded-coupler-carb-shaft/
?
Pix on request?Tom
?
?
?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation? $12.96
Archive: http://www.team.net/archive
?
?
6pack at autox.team.net
http://autox.team.net/mailman/listinfo/6pack
?
Unsubscribe/Manage: http://autox.team.net/mailman/options/6pack/robertrudolphi@yahoo.com
?

?


------------------------------

Message: 2
Date: Wed, 24 Nov 2021 07:49:10 -0600
From: rmf3860 rmf3860 <bobfabie at gmail.com>
To: Tomislav Marincic <tomislav.marincic at earthlink.net>
Cc: 6pack at autox.team.net, robertrudolphi at yahoo.com
Subject: Re: [6pack] Throttle Linkage ?S? Connectors
Message-ID:
    <CA+aQ7wzXnWC+nqdTPzCuXscm6Qph4Yypte_AfdEiMHbp=3=pHg at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

Thanks Tom. I have a heat deflector. I bought it many years ago.
Considering the slop in my throttle linkage, I decided to order a
replacement from Richard at Goodparts.

Bob Fabie

On Wed, Nov 24, 2021 at 6:36 AM Tomislav Marincic <
tomislav.marincic at earthlink.net> wrote:

> Hello Robert,
>
> I'll snap you a photo of the barrel linkage in place. One of them works,
> but if I recall correctly, there was no way to use two and get them
> installed without removing the carbs and linkage.
>
> I Jet Hot coated both of my manifolds, and wrapped the exhaust header in
> Thermo-Tec exhaust tape. The Jet Hot keeps the manifolds looking nice, and
> keeps the header from corroding, but it won't cure your fuel cook-off
> problems. Your best bet is one of Joe Alexander's heat shields, which I
> think are being sold through Moss as well.
> https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE
> (
> https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE
> )
>
> https://www.summitracing.com/parts/the-11021?rrec=true (
> https://www.summitracing.com/parts/the-11021?rrec=true)
>
> Good Luck, Tom
>
>
>
>
> -----Original Message-----
> From: robert rudolphi
> Sent: Nov 23, 2021 1:23 PM
> To: 6pack at autox.team.net , Tomislav Marincic
> Subject: Re: [6pack] Throttle Linkage ?S? Connectors
>
> To follow up on this I am having my carbs rebuilt this winter (Joe Curto)
> and was thinking about have the intake and stock exhaust manifolds Jet
> coated. I am trying to reduce hard starting when hot. Would also like to
> get the throttle linkages re-plated/refinished and was wondering what is
> the best way to go?
>
> Thanks in advance for any feedback
>
> Robert
>
>
>
>
>
> On Tuesday, November 23, 2021, 12:13:49 PM EST, Tomislav Marincic wrote:
>
>
>
>
>
>
> When I set up my dual ZS175?s I used new link clips from Roadster Factory.
> They quickly became distorted and introduced slop into the linkage.
>
> I?m currently using one SU link clip sourced from Richard Good, which is
> much sturdier and more rust-resistant than the ZS part. I?m also using a
> single rigid coupling that I sourced from Grainger. I forget why, but
> installing two shaft linkages was problematic, and the gap between carb
> throttle shafts was too wide to use two SU linkages.
>
> I might have one of each in my spares if you need them.
>
> https://www.grainger.com/search?searchQuery=nomar+clx-5-5-a&searchBar=true
>
> https://www.goodparts.com/product/folded-coupler-carb-shaft/
>
> Pix on request?Tom
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
>
>
> 6pack at autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/6pack/robertrudolphi@yahoo.com
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
>
>
> 6pack at autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/6pack/bobfabie@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/6pack/attachments/20211124/ed838233/attachment-0001.htm>

------------------------------

Message: 3
Date: Wed, 24 Nov 2021 14:39:50 +0000 (UTC)
From: Jim Jones <jimjcmo at yahoo.com>
To: Tomislav Marincic <tomislav.marincic at earthlink.net>,
    <robertrudolphi at yahoo.com>,  <6pack at autox.team.net>
Subject: Re: [6pack] Throttle Linkage ?S? Connectors
Message-ID: <385333468.2961619.1637764790031 at mail.yahoo.com>
Content-Type: text/plain; charset="utf-8"

I have a new exhaust shield available if anyone would want it. Email me for price if you?re interested.
Jim JonesFormer ?72 6 owner


Sent from Yahoo Mail for iPad


On Wednesday, November 24, 2021, 6:36 AM, Tomislav Marincic <tomislav.marincic at earthlink.net> wrote:

Hello Robert,
?
I'll snap you a photo of the barrel linkage in place. One of them works, but if I recall correctly, there was no way to use two and get them installed without removing the carbs?and linkage.
?
I Jet Hot coated both of my manifolds, and wrapped the exhaust header in Thermo-Tec?exhaust tape. The Jet Hot keeps the manifolds looking nice, and keeps the header from corroding, but it won't cure your fuel cook-off problems. Your best bet is one of Joe Alexander's heat shields, which I think are being sold through Moss as well. https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE (https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE)
?
https://www.summitracing.com/parts/the-11021?rrec=true (https://www.summitracing.com/parts/the-11021?rrec=true)
?
Good Luck, Tom
?
?
?
?
-----Original Message-----
From: robert rudolphi 
Sent: Nov 23, 2021 1:23 PM
To: 6pack at autox.team.net , Tomislav Marincic 
Subject: Re: [6pack] Throttle Linkage ?S? Connectors
?
To follow up on this I am having my carbs rebuilt this winter (Joe Curto) and was thinking about have the intake and stock exhaust manifolds Jet coated. I am trying to reduce hard starting when hot. Would also like to get the throttle linkages re-plated/refinished and was wondering what is the best way to go?
?
Thanks in advance for any feedback
?
Robert
?
?
?
?
?
On Tuesday, November 23, 2021, 12:13:49 PM EST, Tomislav Marincic wrote:
?
?
?
?
?
?
When I set up my dual ZS175?s I used new link clips from Roadster Factory. They quickly became distorted and introduced slop into the linkage.
?
I?m currently using one SU link clip sourced from Richard Good, which is much sturdier and more rust-resistant than the ZS part. I?m also using a single rigid coupling that I sourced from Grainger. I forget why, but installing two shaft linkages was problematic, and the gap between carb throttle shafts was too wide to use two SU linkages.
?
I might have one of each in my spares if you need them.
?
https://www.grainger.com/search?searchQuery=nomar+clx-5-5-a&searchBar=true
?
https://www.goodparts.com/product/folded-coupler-carb-shaft/
?
Pix on request?Tom
?
?
?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation? $12.96
Archive: http://www.team.net/archive
?
?
6pack at autox.team.net
http://autox.team.net/mailman/listinfo/6pack
?
Unsubscribe/Manage: http://autox.team.net/mailman/options/6pack/robertrudolphi@yahoo.com
?

?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation? $12.96
Archive: http://www.team.net/archive


6pack at autox.team.net
http://autox.team.net/mailman/listinfo/6pack

Unsubscribe/Manage: http://autox.team.net/mailman/options/6pack/jimjcmo@yahoo.com




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/6pack/attachments/20211124/4fa9bbf6/attachment.htm>

------------------------------

Subject: Digest Footer

_______________________________________________
6pack mailing list
6pack at autox.team.net
http://autox.team.net/mailman/listinfo/6pack


------------------------------

End of 6pack Digest, Vol 81, Issue 7
************************************
  _______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive


6pack at autox.team.net
http://autox.team.net/mailman/listinfo/6pack

Unsubscribe/Manage: http://autox.team.net/mailman/options/6pack/dave1massey@cs.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/6pack/attachments/20211124/ce27f996/attachment-0001.htm>

More information about the 6pack mailing list