[6pack] Motor Install

[BILL WELLBAUM]

Good idea--which we did. So far there is just enough space to fit the 1/2" belt. What a revelation!


> On July 13, 2021 at 2:31 PM Berry Price <btp44 at aol.com> wrote:
> 
>     Just a thought-when you install the engine, pry it rearward before tightening the engine&trans. mounts. This provide enough clearance between the cross tube&damper to make removing&replacing the fan belt easier in the future.
>     Berry
> 
> 
>     -----Original Message-----
>     From: BILL WELLBAUM <wcwellbaum at cox.net>
>     To: rmf3860 rmf3860 <bobfabie at gmail.com>; 6pack at autox.team.net
>     Sent: Tue, Jul 13, 2021 10:45 am
>     Subject: Re: [6pack] Motor Install
> 
>     We just installed my engine 2 weeks ago. We loosely bolted both left and right hand mounts to the block, got it more or less lined up, and then bolted them to the body mounts. Keep everything loosey goosey until everything is lined up--then tighten them down.
> 
> 
>         > > On July 13, 2021 at 1:06 AM rmf3860 rmf3860 <bobfabie at gmail.com> wrote:
> > 
> >         I’m planning ahead, and It’s been too many years since I did it last, so here’s my question:
> > 
> >         Is it best to install the engine with the brackets and motor mounts attached to the block, and then line up the mounts to the frame?
> > 
> >         Couldn’t find much help in Bentleys. 
> > 
> >         Thank you all. 
> > 
> >         Bob Fabie
> >         _______________________________________________
> >         Support Team.Net http://www.team.net/donate.html
> >         Suggested annual donation $12.96
> >         Archive: http://www.team.net/archive
> > 
> > 
> >         6pack at autox.team.net
> >         http://autox.team.net/mailman/listinfo/6pack
> > 
> >         Unsubscribe/Manage: http://autox.team.net/mailman/options/6pack/wcwellbaum@cox.net
> > 
> > 
> >     >      
>     _______________________________________________
>     Support Team.Net http://www.team.net/donate.html
>     Suggested annual donation  $12.96
>     Archive: http://www.team.net/archive
> 
> 
>     6pack at autox.team.net mailto:6pack at autox.team.net
>     http://autox.team.net/mailman/listinfo/6pack
> 
>     Unsubscribe/Manage: http://autox.team.net/mailman/options/6pack/btp44@aol.com
> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/6pack/attachments/20210713/9ec1cde0/attachment.htm>