[6pack] Useless post

[Richard Lindsay]

Hey friends,
   Here's yet another TR6 project update. It's boring but short. (Work time
has been limited.)
   The lower edges of the sill carpets are now glued in. I didn't use
contact cement. Rather, I used flexible carpet cement. I did that work a
day ago so the lower edge would be firmly attached when I rolled the edge
up and over the radius to and including the molding lip. I also trial
fitted the floor carpet on the driver's side. The fit is excellent. I still
need to trim the pad from beneath the radio panel attachment feet. The fit
is too tight for pad AND carpet, but with the pad out, the carpet will slip
under and the bolts will go right in.
   I also finished the upholstery on the triangular braces at the rear of
the door openings. They look great. I really look forward to seeing the
carpet and upholstery after the rubber door molding goes on. Adjusting the
door for alignment and closing ease, not so much. Okay, okay, I like that
bit too.

Happy Saturday,

Rick
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/6pack/attachments/20191214/526135d1/attachment.htm>