[6pack] Ignition lock

[John Cohen]

I used a dremel tool with a cutting disc to cut a slot in the remains of the
sheer bolts.  Then you should then be able to remove them with a small
slotted screw driver.  You should be able to access them thru the speedo &
tach holes.  Definitely replace with cap screws.

John Cohen
76 TR6

-----Original Message-----
From: 6pack-bounces at autox.team.net [mailto:6pack-bounces at autox.team.net] On
Behalf Of Kevin McNelis
Sent: Wednesday, June 02, 2010 10:38 AM
To: 'Ken Davis'; '6pack'
Subject: Re: [6pack] Ignition lock

More than likely, you will need a broken screw extractor kit.  The steering
lock had sheer bolts, so the heads are broken off.  You will have to get a
set of those "backwards" twist drill bit things made to remove broken
screws.  It's a pain in the arse, ask how I know.  I replaced the sheer
bolts with allen head cap screws.

Kevin
'72 BRG CC82183U