[6pack] Help with A-type OD wiring

[John North]

How do you plan to sell these ?   I would be interested in a price for
the j-type...

John North

On Wed, Jun 10, 2009 at 1:12 PM, <osternd at copper.net> wrote:
> I'm  looking  for  someone that can help me out on getting some
> information  about  TR6  A-type  overdrive  wiring - preferably
> someone  who  has  an  earlier TR6 with the original A-type and
> wiring.
>
> A  little background: I've designed an overdrive controller (an
> easy  to use module that locks the OD out after shifting out of
> gear)  for my TR6 w/ J-type OD, and have been pretty happy with
> it.  So,  I've decided to build a few of these modules and have
> all  the details worked out for the J-type OD. However, since I
> don't  have an A-type for reference, I need some information to
> get me past the last design hurdle for this. Two questions:
>
>
>
> 1)  The  schematic  shows  a  yellow/green  wire connecting the
> driver's  OD switch to the OD relay on the firewall. Looks like
> there  is  an in-line bullet connector in-between. What I don't
> know  is  where  the connector is. I assume it's under the dash
> close  to  the steering column. The module would need to access
> these two connections.
>
>
>
> 2)  With  my  J-type TR6, the OD wires route to the OD from the
> passenger side of the transmission tunnel close to the firewall
> (behind  the kidney panels). There should be a yellow wire with
> in-line  bullet  connector  (for the OD inhibitor switch) along
> with  a  green  wire  (reverse  lights) with bullet connectors.
> Might also be a yellow/purple wire, but not sure -
>
>
>
> Anybody  willing  to  get  their hands a little dirty and check
> this out for me? You'd have my undying gratitude! :)
>
>
>
> TIA
>
>
>
> Dale O
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> 6pack at autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> http://www.team.net/archive
>
> You are subscribed as johncnorth at gmail.com