Open each bleeder separately, pump out all you can then bleed each wheel till
you see purple. Some might disconnect at the MC and blow it out with air.
Bill
Last night I saw upon the stair,
A little man who wasn't there,
He wasn't there again today
Oh, how I wish he'd go away.... Mearns
On Aug 20, 2021, at 6:28 PM, Dave Connitt <dconnitt@fuse.net> wrote:
Hi All,
What is the preferred way to convert from DOT3 to DOT5 hydraulic fluid in my
TR4A. The clutch is going to be easy as the leaking master cylinder and slave
are being replaced and the short hard and soft line will be fairly easy to
flush. I need suggestions regarding the brakes.
Thanks,
Dave Connitt
Sent from my iPhone
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/notakitcar@yahoo.com
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
|