Re: [TR] Float bowls overflowing

[Chip19474@aol.com]

Roger,
 
Cracked floats would do it!  The floats get saturated with fuel and  don't 
"float" anymore!  I would suspect your fuel pump pressure but you  said it 
ran fine with that fuel pump until now.  I assume you're  using a fuel filter 
so we can rule out nasty bits of dirt clogging the  valves....if the float 
level is set to spec and the pump hasn't suddenly decided  to put out 8 or 
10psi, I'm guessing that there's a crack in one of your  floats.
 
Chip Krout
Delaware Valley Triumphs, Ltd.
Skippack,  PA
1976 TR6 CF57822U



In a message dated 5/10/2012 12:07:24 P.M. Eastern Daylight Time,  
elliottr@rmi.net writes:

Assuming  I haven't botched installing the needle valves and floats, is 
there anything  besides excess fuel pressure that would cause the bowls to  
overflow?

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net