[TR] Float bowls overflowing

triumphs

[TR] Float bowls overflowing

Subject:	[TR] Float bowls overflowing
From:	dconnitt at fuse.net (Dave Connitt)
Date:	Thu, 10 May 2012 19:34:11 -0400

In rebuilding my SU HS-6 carburetors, I came across some information myself..
If you remove the vacumn domes and pistons, with the float bowls full the fuel
should to sit just below the main jets. If the bridge in the carb where the
main jet sits is wet, then the floats are set too high. I haven't had a chance
to actually prove this since my TR is not running yet but it does kind of make
sense in the simplicity of it..
Dave Connitt

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[TR] Float bowls overflowing, (continued) [TR] Float bowls overflowing, John Macartney Re: [TR] Float bowls overflowing, John Macartney [TR] Float bowls overflowing, Cliff Hansen Re: [TR] Float bowls overflowing, Cliff Hansen [TR] Float bowls overflowing, Chip19474 at aol.com Re: [TR] Float bowls overflowing, Chip19474 [TR] Float bowls overflowing, Frank Fisher Re: [TR] Float bowls overflowing, Frank Fisher [TR] Float bowls overflowing, Roger Elliott Re: [TR] Float bowls overflowing, Roger Elliott [TR] Float bowls overflowing, Dave Connitt <= Re: [TR] Float bowls overflowing, Dave Connitt [TR] Float bowls overflowing, Roger Elliott Re: [TR] Float bowls overflowing, Roger Elliott

Previous by Date:	Re: [TR] Float bowls overflowing, John Macartney
Next by Date:	[TR] Help needed Philadelphia / Wilmington, Andrew Uprichard
Previous by Thread:	Re: [TR] Float bowls overflowing, Roger Elliott
Next by Thread:	Re: [TR] Float bowls overflowing, Dave Connitt
Indexes:	[Date] [Thread] [Top] [All Lists]