> As the others have said, should work, as I recall from a 4
> cylinder
> rebuild many years ago, the liners are supposed to sit ever so slightly
> proud of the block, the manuals have the specs, should check to make
> sure
> they are within spec there, shouldn't matter but slight variations in
> the
> liners or block could make a difference.
Yes, indeed! Liner protrusion is quite important.
Be sure to check on both sides. I have found two TR3 engines in a row now,
where the liner height was not even on both sides. Both had a definite
tendency towards head gasket leaks.
-- Randall
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
|