triumphs
[Top] [All Lists]

[TR] TR4 heater

Subject: [TR] TR4 heater
From: leejohn7 at gmail.com (Lee&John Howard)
Date: Sun, 11 Dec 2011 17:51:31 -0800
References: <CAJaD1DOA9Yr9GyVH04JnbNiekg5CAx16AWyPcX1kWnY+LaDrLw@mail.gmail.com> <B7A4F4AC817443BAAE3092FA45F8C8A0@DaveLaptop>
That's a great you have there, Dave.
Mine also has the two white wires. Was your blower motor working before
removal? As I feared, everything has to come out. Not a project I have time
or just now so will have to drive cold this winter.
Thanks very much for the guidance.
John

On Sun, Dec 11, 2011 at 1:47 PM, Dave Connitt <dconnitt at fuse.net> wrote:

> John,
> I just finished rebuilding my TR4A heater. I think they are about the
> same. I have pictures of the thing coming apart and going back together on
> my website.
> http://home.fuse.net/davestr4a  go to Progress and Final Assembly and
> scroll down to heater. The heater fan is pop riveted into a tripod type of
> metal bracket. You need a box of 3/16 x 1/2" pop rivets. One thing I
> noticed was (at least on my blower) is that both wires are white coming out
> of the motor so you have to check and mark the positive wire before you get
> it all back together.
> Dave Connitt
> '67 TR4A IRS
> http://home.fuse.net/davestr4a

<Prev in Thread] Current Thread [Next in Thread>