[TR] TR4 heater

[dconnitt at fuse.net (Dave Connitt)]

John,
I just finished rebuilding my TR4A heater. I think they are about the same. 
I have pictures of the thing coming apart and going back together on my 
website.
http://home.fuse.net/davestr4a  go to Progress and Final Assembly and scroll 
down to heater. The heater fan is pop riveted into a tripod type of metal 
bracket. You need a box of 3/16 x 1/2" pop rivets. One thing I noticed was 
(at least on my blower) is that both wires are white coming out of the motor 
so you have to check and mark the positive wire before you get it all back 
together.
Dave Connitt
'67 TR4A IRS
http://home.fuse.net/davestr4a