triumphs
[Top] [All Lists]

[TR] Hood dzus fastener brackets - TR2/3

Subject: [TR] Hood dzus fastener brackets - TR2/3
From: wbeech at flash.net (wbeech at flash.net)
Date: Sat, 19 Mar 2011 15:47:40 -0600
References: <4D8513B5.5070703@execulink.com> <476862963.2791404.1300569306908.JavaMail.root@sz0048a.westchester.pa.mail.comcast.net>
I just went to the local FLAPS and bought the heaviest gasket material they
had, and use a double thickness of that.
Bill

Bill Beecher
'58 TR-3A TS30766L  "Tarbaby"
www.triumphowners.com/1566
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"

 

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of tfansher at comcast.net
Sent: Saturday, March 19, 2011 3:15 PM
To: Angelo Graham
Cc: triumphs at autox.team.net
Subject: Re: [TR] Hood dzus fastener brackets - TR2/3

THey are available from the usual sources. Red thick cardboard type
material. 
You shim them up so that the hood aligns correctly with the front cowl. 
Tom
----- Original Message -----
From: "Angelo Graham" <agraham at execulink.com>
To: triumphs at autox.team.net
Sent: Saturday, March 19, 2011 4:36:05 PM
Subject: [TR] Hood dzus fastener brackets - TR2/3 

Hello LIst: 
Looking at some finishing touches on my project and wondering what listers
have used under the dzus fastener brackets. When I removed them, there was
some form of petrified rubber underneath them. 
Do you have to try to 'shim' the brackets to contact the dzus fastener, or
is about 1/4" of material enough to do the job? Thought of using layers of
old inner-tube rubber - material on hand. 
Thanks in advance. 
Angelo Graham 


_______________________________________________
Triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Manage your account:
http://autox.team.net/mailman/options/triumphs/wbeech at flash.net


<Prev in Thread] Current Thread [Next in Thread>