THey are available from the usual sources. Red thick cardboard type material.
You shim them up so that the hood aligns correctly with the front cowl.
Tom
----- Original Message -----
From: "Angelo Graham" <agraham@execulink.com>
To: triumphs@autox.team.net
Sent: Saturday, March 19, 2011 4:36:05 PM
Subject: [TR] Hood dzus fastener brackets - TR2/3
Hello LIst:
Looking at some finishing touches on my project and wondering what
listers have used under the dzus fastener brackets. When I removed them,
there was some form of petrified rubber underneath them.
Do you have to try to 'shim' the brackets to contact the dzus fastener,
or is about 1/4" of material enough to do the job? Thought of using
layers of old inner-tube rubber - material on hand.
Thanks in advance.
Angelo Graham
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|