> - 1 denso alternator ( part number coming )
> - 1 wide belt pulley
> - 1 bracket adaption "thingy", yet to be designed for this project
> - 1 pigtail connector for the alternator
>
>
The wide pulley that I've seen available for purchase is meant for the Delco
alternator, I believe the shaft diameter on the Denso is different, actually I
think very close the the original generator diameter. A stock pulley cannot
be used, however, without some machine shop work.
I also think the Denso will be wired up slightly differently than the Delco,
at least the Denso I purchased. It needs a switched power source to energize
which I will be adding. I found a suitable pigtail on ebay for the Denso.
Randy
_________________________________________________________________
The New Busy think 9 to 5 is a cute idea. Combine multiple calendars with
Hotmail.
http://www.windowslive.com/campaign/thenewbusy?tile=multicalendar&ocid=PID283
26::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_5
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|