I'm working on initial fitment of the rear wings and in purchasing cage nuts
ect. I found that TRF was selling a rear "clamp" for the rear wings. It's a
fairly heavy piece of metal approx. 3 inches long with a cage nut welded to
it. The end opposite of the caged nut is bent 90 degrees but the bent out
part is only about 1/4 inch. I can't figure out where or how they go.
Anyone have any ideas?
gary n.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|