I made one out of cork but "gas tolerant rubber" would work, too.
Tom
Subject: [TR] TR4 Replacement Fuel Pump Gasket for Sediment Bowl
>I decided today that it was time to remove and clean the sediment bowl on
>my TR4 fuel pump. Something I was not counting on was that the rubber
>gasket for the sediment bowl was crumbling apart. After just putting
>everything back together after replacing connecting rod bearings, it looks
>as if I won't be enjoying the warm weather tomorrow. So I head for the
>Moss catalog to order a new gasket. I find that they only sell a gasket
>for the original AC pump. I installed one of the replacement pumps a few
>years ago. I'm now thinking about cutting my own gasket. What I need to
>know is where I can get the right type of gasket material.
>
> Paul
> 61 TR4
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|