> Wouldn't a non-absorbent material be best?
What I did with my tank, once I soaped, cleaned, tested, and ensured it was
solid, was paint it with POR-15, then rested it on a bicycle innner tube cut
to proper lengths.B With that kind of prep on the outside, the only thing you
should have to worry about is water on the inside.
At least, in theory.
Terry Smith, '59 TR3A TS 58667
New Hampshire
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|