I've had a small leak of brake fluid where the brake hose screws into the
front brake caliper unit. I've taken the relatively new hose off, cleaned it
up, checked the caliper area and re-screwed in, but have yet to check it out
for a leak.
If it slow leaks this time, I'm wondering about putting a thin copper washer
between the hose and caliper unit. In the catalog I see where Lockheed did
this on their units (although mine is a Girling).
Thanks,
Paul Dorsey
60 tr3
--
I am using the free version of SPAMfighter for private users.
It has removed 698 spam emails to date.
Paying users do not have this message in their emails.
Get the free SPAMfighter here: http://www.spamfighter.com/len
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|