[TR] Fall into the GAP

To:	"list Triumph" <triumphs@autox.team.net>
Subject:	[TR] Fall into the GAP
From:	"Paul Dorsey" <dorpaul@negia.net>
Date:	Sat, 10 Nov 2007 09:05:48 -0500

How wide should I make the gaps on the sides of the bonnet? (This would be
before any beading or beading-cover is put in.)

I'm guessing a 1/4" on each side of the bonnet, but then, I've never owned or
rebuilt a Tr before.

Thanks, Paul Dorsey
60 Tr3
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org

http://www.team.net/donate.html

Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

<Prev in Thread]	Current Thread	[Next in Thread>
[TR] Fall into the GAP, Paul Dorsey <= Re: [TR] Fall into the GAP, wbeech

Previous by Date:	Re: [TR] [Spits] spit suspension question, Rarebits
Next by Date:	Re: [TR] Engine noise B-25, John Herrera
Previous by Thread:	[TR] Electric fan connection, Chris Buckley
Next by Thread:	Re: [TR] Fall into the GAP, wbeech
Indexes:	[Date] [Thread] [Top] [All Lists]