In a message dated 6/26/2007 6:31:20 AM Central Daylight Time,
KingR44916@aol.com writes:
> just got another gauge and the reading goes to hot in a few minutes with
> the
> water temp still cold in the radiator.replaced the sending unit and the
> voltage stabilizer anyone have any clues what i should do.
>
The water in the radiator may be cold but what about the water in the engine
where the sending unit is mounted? You may have a thermostat that is not
opening.
Another possibility is that you may not have the right sending unit for your
gauge. The two work together and must be of the right combination. If you
have a non-stock gauge it may not work right with the stock sending unit. And
vice-versa.
Dave
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|