| To: | "Martin Sukey" <trmarty@glwb.net>, |
|---|---|
| Subject: | RE: [TR] A-Arm question |
| From: | "Randall" <tr3driver@comcast.net> |
| Date: | Sat, 3 Jun 2006 09:30:27 -0700 |
> Does anybody have a front a-arm upper and or lower out of their car that > they could measure the width of the socket where the bushings fit with a set > of micrometers or calipers? I am looking for TR6 but I believe the TR4 is > the same (maybe). I checked two TR4 arms, one was 1.135" the other 1.125". Plus or minus a couple. Randall === This list supported in part by The Vintage Triumph Register === http://www.vtr.org |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [TR] advice on installing a front swaybar on TR4A, Gerald M Van Vlack |
|---|---|
| Next by Date: | [TR] Salvador blue, oliver |
| Previous by Thread: | [TR] A-Arm question, Martin Sukey |
| Next by Thread: | Re: [TR] A-Arm question, Dave1massey |
| Indexes: | [Date] [Thread] [Top] [All Lists] |