----- Original Message -----
To: "triumph list" <triumphs@autox.team.net>
Sent: Sunday, November 27, 2005 10:47 AM
Subject: TR4A accelerator linkage
> I am restoring a TR4A and need to move the accelerator linkage from the
donor
> car to the new tub. This is the pedal, cross tube, and lever, with all the
> pieces threaded on them.
The accelerator linkage is not threaded but pinned together by three spring
pins (shop manual calls them Mills pin). Illustration in the shop manual as
well as the Moss catalog is very clear. Be sure to replace the two nylon
bushings as the job is just about impossible with engine in place.
Lou Metelko
Auburn, Indiana
65 TR4A
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|