In a message dated 8/19/02 12:50:06 PM Eastern Daylight Time,
ryoung@NAVCOMTECH.COM writes:
<< The opening in the fitting is not a pipe thread. However, if you remove
the
fitting from the water pump housing, the thread into the housing is >>
This is the current set up in my TR. I painted both plugs black, and you can
hardly notice them.
David Oliner
59,60 Bugeyes
67 TR4A
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|