triumphs
[Top] [All Lists]

RE: Forwarded: TR6 Electrical Gremlins

To: "'Randall Young'" <ryoung@navcomtech.com>, "'Michael D. Porter'" <mporter@zianet.com>, "'Dave Massey'" <105671.471@compuserve.com>
Subject: RE: Forwarded: TR6 Electrical Gremlins
From: "Bryce Milton" <Bryce@Milton.com>
Date: Tue, 13 Aug 2002 09:32:03 -0700
Cc: <triumphs@autox.team.net>
        Thank you all for your helpful responses - I'll pick up the
book, get some better testing equipment, and pay some more attention to
my fuse block.

-Bryce


-----Original Message-----
From: Randall Young [mailto:ryoung@navcomtech.com] 
Sent: Tuesday, August 13, 2002 6:01 AM
To: Bryce@Milton.com
Subject: RE: Forwarded: TR6 Electrical Gremlins


Bryce, if you don't already have one, get one of Dan Master's TR6 wiring
books.  His email is DANMAS@aol.com .  From what I've seen, the
schematics in the Bentley just don't match US-spec cars, Dan's book is
the only place to find an accurate schematic for your car.  It's also
full of troubleshooting hints and step-by-step instructions.

Then get a test lamp like
http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=43414
Connect the lead to ground, turn the key on and start following the
circuit finding where there is and isn't power.  Start at the fuse
block, checking for power on both sides of the fuse in question, not
only on the fuse but on the terminals (the block itself may have opened
up).  Work outward from there, the problem should quickly become
obvious.

Randall

>      From: "Bryce Milton" <Bryce@Milton.com>
>      Subject: TR6 Electrical Gremlins
>      Date: Tue, 13 Aug 2002 00:34:12 -0700
>
>       Pretty much everything on the bottom-most (or right-most
according to 
> Bentley's PG 488 diagram) circuit of my USA-spec '76 TR6's fuse box 
> has ceased functioning.  This includes my windshield wipers, turn 
> signals, brake lights, heater fan, fuel level indicator, and 
> temperature gauge, etc.  The problem first manifested itself a year 
> ago as an intermittent issue that would disappear before I could 
> locate the problem, but it is now the normal state of affairs.  I've 
> cleaned every contact and connector on my 10-year old wiring harness 
> that I can get at, and verified every fuse to no avail.  Any tips from

> the pros? Mostly complete maintenance log located here:
>
> http://www.milton.com/bryce_sara/default.aspx?Triumph=true
>
> Any help greatly appreciated - Hand signals and no wipers are fine on 
> a sunny day, but they'll get old real quick this winter here in 
> Seattle ;-)

///  triumphs@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>