triumphs
[Top] [All Lists]

Re: PI system Bosch fuel pump - Russian (?) translation

To: technical@iwnet.screaming.net, triumphs@autox.team.net
Subject: Re: PI system Bosch fuel pump - Russian (?) translation
From: "Michael Gajic" <michaelgajic@hotmail.com>
Date: Fri, 09 Aug 2002 11:50:34 +1000 FILETIME=[26C1FAF0:01C23F47]
The preferred solution to this problem here in Australia (where there aren't 
very many early Audis) is to fit a primer pump between the petrol tank and 
the original pump, which has the effect of keeping the petrol under pressure 
stopping any vapourisation.  Not sure of the type of pump you should use, or 
its source, but I could find out if someone is interested.

Cheers,
Michael
63' TR4
69' 2000
Sydnay, Australia


>From: "Graham Stretch" <technical@iwnet.screaming.net>
>Reply-To: "Graham Stretch" <technical@iwnet.screaming.net>
>To: "Triumph List" <triumphs@autox.team.net>
>Subject: Re: PI system Bosch fuel pump - Russian (?) translation
>Date: Thu, 8 Aug 2002 14:52:27 +0100
>
>Hi Lee
>My 2.5PI Saloon is running quite happily on a Bosch pump from an Audi 100
>coupe, the Square shape with K Jet system. I took the whole lot off the
>bottom of the car in a scrap yard and fabricated a plate to carry it on the
>original mounts. I can send a photo if you like. I also have a pump off a
>Volvo 260 series car which worked but was noisy, worn out I think.
>
>Graham.
>
>----- Original Message -----
>From: "Janssen, Lee K" <lee.k.janssen@lmco.com>
>To: "- triumph (E-mail)" <Triumphs@autox.team.net>
>Sent: Thursday, August 08, 2002 12:56 PM
>Subject: PI system Bosch fuel pump - Russian (?) translation
>
>
> > My current PI pump (aftermarket - not Bosch) is failing at high
>temperatures
> > and I wanted to get a Bosch pump. The problem is trying to find the best
> > Bosch pump for the application. As a result I need a little bit of
> > translation help since I can't find the page in English.
> >
> > Of course if someone knows a good replacement pump for PI (other than
>Lucas)
> > please let me know.
> >
> > Could someone translate the following table headers for me.
> > source document is at 
>http://www.is.svitonline.com/benzo_nasosy/nasos.htm
> >
> > ??????????? ??????? - my guess is this is model number
> > ???????????? ???????? ? ??\??2 - my guess is flow rate
> > ????. - ???
> > Thanks in advance for answering my unusual request
> > Later
> > Lee Janssen
> > Denver CO





_________________________________________________________________

///  triumphs@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>