> > This morning I took off the mounting plate off the car and
> > checked the depth
> > of the dzus fastener depth. It appears the wire is about 1/8"
> > too deep for
> > the fastener to attach without mangling. There is about a 3/16"
> > gap between
> > the plate and the wire would it be reasonable to press the wire
> > closer? If
> > so, what should the gap be?
==================================================
I think maybe the problem just might be the wrong fastners, David could very
well have the side curtain Dzus instead of the staunchions, also that wire
on the bottom plate is not going to move. "FT"
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|