Okay... while I'm waiting for steering parts to arrive, I decided to dig into
my side window/windscreen frame fit problem. I have the interior panel off
the door, and here's what I've found:
When I roll the window up or down, the widow channel is not parallel to the
door. The rear end of the channel sits higher than the front. This causes
the top of the glass to strike the windscreen frame before the window is
completely rolled up.
The stop bracket (including the bolt, nut and washer) that mounts roughly
half-way up on the door (Bentley Fig. 43 No. 72). Everything else appears to
be connected properly.
Okay... before I start taking stuff apart and experimenting, does anyone have
any advice or suggestions?
Thanks!
Kurtis J.
Russellville, Arkansas
1963 TR4
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|