TR6 front suspension improvements

[Wayne Whippo <WayneWhippo@compuserve.com>]

Hello Listers,

I just finished making a set of reinforcing plates to weld to the
back of the front lower wishbone inner mounting points per 
Len Renkenberger's "Six Tech Manual".

Can someone please help me understand what he means on
page FS4 when he says:

   "An additional and highly desirable effort is a reinforcement 1 inch
   wide welded between the rear mount box and the frame just below the
   motor mount. Size and shape are not too important but the additional
   stiffness of the mount is."

Thanks for your time,

Wayne Whippo
Boulder, Colorado
72 TR6 CC81472UO "Snapper"