Peter-
I have a '75 Spit with the same carb.
I was able to adjust the carb "in situ" by removing the float bowl, and
carefully pushing upwards on the float until it just closed the valve. Be
careful not to press too hard or you will get erroneous readings. This has
worked for me in the past. My current car is set up this way, and I have never
had a problem since.
Good luck!
Peter Zaborski wrote:
> Is there a way to determine if carb float levels are too low without pulling
> the carbs?
>
> (76 TR6 with stock Z-S 175CDSE carbs)
>
> Peter Zaborski
> 76 TR6 (CF58310 UO)
> Calgary AB Canada
--
Glenn E. Bowley, ABOC
Mechanical Designer/
CAD Systems Administrator
Gerber Coburn Inc.
55 Gerber Rd.
South Windsor, CT 06074-3244
gbowley@snet.net
|