PB Blaster is my penetrant of choice too! A hearty endorsement...
P.S. My wife hates the smell though. (too bad)
Atwell Haines
++++++++++++++
At 04:38 PM 1/19/98 -0600, Martin Libhart wrote:
>For what it's worth...
>
>After trying several different products (Liquid Wrench, etc.etc.) over
>the last 2 weeks to free up some badly frozen brake bleeder fittings, as
>well as 2 clamp bolts on an exhaust pipe, I finally gave in and spent
>twice the $ for a spray can of "Blaster". Available at PepBoys and other
>parts outlets.
>
>I'm the first to be skeptical about any of these products that make
>their fantastic claims, but this product works! It is totally different
>than most of the 'solvent-type' products - it actually looks like orange
>colored milk out of the nozzle, and foams upon contact with the bolt or
>part. I soaked each fitting and bolt 4 times over the last 24 hours,
>went out today to check them with a wrench, and "bingo"!
>
>All standard disclaimers apply - just a product that I found to work and
>would recommend highly.
>
>Martin Libhart
>1972 TR6
>1970 Spitfire
>
>
>
|