I found the same thing after about 8 months but I put it down to the fact
that the can was nearly empty. I hope the second can I bought doesn't go
away. Moral of the story - buy a can when you're doing a major job and use
silicone on smaller projects.
John
>At 05:21 PM 1/17/98 -0500, John McEwen wrote:
>>Hi Atwell;
>>
>>Did you leave some of the goo extruded from the end of the screw-on nozzle
>>or did you wipe it off when you finished using the product? I have used
>>the "Stuff" for quite a while now and it is important to leave the goo
>>sticking out. When you go to use the product again, simply pull out the
>>newly-formed plug and it's ready to go. These instructions are on the
>>cannister.
>>
>>John
>>
>I had left the "plug" sticking out of the screw-on nozzle as you described.
> And when I pulled on it, it came out easily as promised. But the
>material had solidified down into the can, and the propeelant couldn't push
>it out.
>
>Maybe four months was too long between uses.
>
>Atwell
|