Ed,
this was discussed, and solved, a couple of months ago;
You just buy a nice little thing from the Mercury Marine company:
It's a special "grease" gun intended for high pressure pumping of
OIL into grease nipples! Part No 91-372 99A 1 and sold under the
Mercury/Quicksilver brand. And cheap it was too. So don't hesitate
to get one - they're great.
/Odd
Ed Carbone wrote:
>
> Hi all,
> I have a question, How do you "oil" the front suspention trunnion
> as the Bentley book says it must be done?
> When attempting to do this with a grease gun, the oil ends up all
> over the floor. The vertical link and trunnion have been disassembled
> and cleaned.
>
> Any ideas?
> TKS
> edc.
--
Odd Hedberg
Pomonagatan 4
S-74236 Östhammar International liaison secretary,
Sweden Triumph Club of Sweden
'70 Spitfire Mk3 FD82497LO Signal Red
E-mail: odd@triumphclub.se / odd.hedberg@bigfoot.com
Club URL: http://www2.passagen.se/triumph/
Home Telephone: Int+ 46-1731 7131
Geographical Position: N 60deg15min E 18deg23min
------------------------------------------------------------
|