triumphs
[Top] [All Lists]

Re: TR4 Interior Replacement

To: tr3run@peachnet.campus.mci.net, triumphs@Autox.Team.Net
Subject: Re: TR4 Interior Replacement
From: cloughbt@batman.flight.wpafb.af.mil (Bruce T. Clough)
Date: Thu, 5 Jun 1997 13:48:22 -0400
Doug,

I've removed the arch covers a few times.  It is glued around the edges and 
will pull up fairly easily.  Be careful and there is minimal chance of ripping 
anything.  The center of the arch cover is padded, with the padding being 
glued to the cover and the arch, so the padding will tend to tear apart (or 
at least it does for me).  No problem, you can either replace the padding 
(best bet) or reuse it, although it won`t keep the center of the cover in 
place inless you glue the padding together, which could affect the padding`s 
"look" from the outside.

When you put it back together, clean as much of the old glue off as possible.

Ciao,

Bruce Clough
CT2966L

<Prev in Thread] Current Thread [Next in Thread>