I'm about to complete the interior restoration on my 74 Spitfire. One of
the few things remaining to be done is to renew the door trim/seals (I'm
referring to the long trim/seal that is applied to the door opening). The
old seals were of the "furflex" type and that's what I'm using to replace
them with (I got them from VB page 61). However, the new trim/seals are
somewhat dissimilar to the old ones. That is, the grove on the seal that
fits over the flange of the door opening appears to be quite shallow
compared to the old trim/seal
Has anyone recently installed these on their car? If so, any advice or
suggestions would be appreciated.
Barry H. Adams
74 Spitfire
|