Advice/Thoughts Needed:
My '70 TR6, Comm. No. CC 51904, does not have the
entire evaporation loss control as diagramed in
all the parts catelogs. There is no Carbon
Canister, it appears that the connector hose was
cut and "stuffed" with a screw in section after
leaving the Emission Tank assembly (I haven't removed
the trunk pannel to see if this is even there).
Without fully understanding this set-up, what do
I need to be worried about and should/must I
reinstall this?
Thanks,
Scott Suhring
Elizabethtown, PA
'07 TR6
|