On Jul 26, 10:46pm, Steve Sutton wrote:
> Subject: TR-6 speedo cable routing
> Can anyone tell me the correct routing for a Overdrive equippedTR-6 (LHD)
> speedo cable? I know it comes off the right side of the O/D unit and ends up
> coming up thru a hole on the left side of the engine compartment, then thru
the
> firewall; it's the run in-between that I am not sure about. Also is the
speedo
> cable secured to the frame or body at any point?
>
> Thanks.
>
> Steve Sutton
> 74 1/2 TR-6
> Ridgecrest, CA
> ssutton@ridgecrest.ca.us <--- Note: new address
>-- End of excerpt from Steve Sutton
Steve,
The important thing about the routing of the cable is to not have any
kinks in it. This is what can cause hunting and bouncing of your speedo.
It doesn't do the cable any good either.
Doug Mitchell
|