At 03:32 PM 7/5/96 -0600, HENSONJ@APSU01.APSU.EDU wrote:
>Helllllp!
>
>My 70 TR6 is now dead in my basement. (For want of a nail the horseshoe was
>lost?) In the process of rebuilding my brake master cylinder, I found a brake
>line was corroded badly. I discovered this when it broke during disassembly. It
>was badly pitted, and I was grateful to find the problem in this manner,
>but I cannot locate a replacement. I tried the usual places (Vicky Brit,
>TRF, Moss, and even Rimmer Bros) but it is not in stock anywhere.
>
>If anyone has a spare (new or used) I would gladly pay for the part and
>shipping etc. This line is for the primary (front) brake circuit from the
>Master cylinder to the pressure valve. It is the one with coarse threads.
>
>Assistance would be gratefully appreciated.
Jim,
there are two pipes coming down from the master cylinder to the pressure
valve. Do you need front or rear? I will have to pull one off a parts car
but it looks to be good. Cost is $6.00 plus a little ups to you.
Regards,
Hal Rogers
H.D. Rogers & Sons
Import Auto Specialists
3418 Barksdale Blvd.
Bossier City LA 71112
(318) 742-3651 voice
(318) 742-5044 fax
Serving Auto Enthusiasts since 1959
|