--===============4516826627242786988==
boundary="----=_Part_720085_1385300227.1695222437810"
------=_Part_720085_1385300227.1695222437810
Content-Transfer-Encoding: quoted-printable
You must not be in CA (or other state with the vapor recovery gas pumps).
All 13 gallons take forever for me, so I never try to go more than 9 or so.
Old cars don't have the on-board carbon canister system that is needed for =
the new pumps.
So there is nothing you can do.
When the nozzle is fully inserted and gas pumped in the pressure rises and =
the pump shuts
off, always spilling gas down the side and onto the ground.=20
I have to hold the nozzle crooked so the bellows doesn't fully seat and jus=
t barely open the
trigger, takes forever.
Some guys hold the nozzle upside down (vertical) and it works better. I ju=
st tried this again
and it did seem to work better than years ago when I last tried it.
Gary
=20
=20
> On 09/19/2023 2:16 PM PDT Greg Oliver <gregdawg89@hotmail.com> wrote:
> =20
> =20
> It does that with my Tiger too. =F0=9F=99=81
> =20
>=20
> ---------------------------------------------
> From: Tigers <tigers-bounces@autox.team.net> on behalf of Joel Martin via=
Tigers <tigers@autox.team.net>
> Sent: Tuesday, September 19, 2023 1:53 PM
> To: Tiger List Serve <tigers@autox.team.net>
> Subject: [Tigers] Gas tank vent hose
> =20
> I have a ongoing issue, more of testing my patience, in that it takes me =
at least 5 minutes to completely fill my gas tanks. It takes the first 8-9=
gallons just fine but the last 3-4 takes forever. I must squeak in .1-.2 =
gallons at a time, meaning I must wait 10-15 seconds for the gas to settle =
in the tanks before adding more.
> =20
> The gas tank vent hose is in the correct location, I believe. No gas fum=
es in trunk. Gas tank sending unit and gauge are pretty accurate. When my=
patience holds and I get the tanks full, gauge shows 11.75 to 12 gallons o=
n the gauge.
> =20
> Any ideas or suggestions as to why this might be happening and potential =
fix would be appreciated.
> =20
> Regards
> =20
> Joel Martin
> _______________________________________________
>=20
> tigers@autox.team.net
>=20
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archi=
ve
>=20
> Unsubscribe: http://autox.team.net/mailman/options/tigers/garywinblad@com=
cast.net
>=20
>=20
>=20
------=_Part_720085_1385300227.1695222437810
Content-Transfer-Encoding: quoted-printable
<!doctype html>
<html>
<head>=20
<meta charset=3D"UTF-8">=20
</head>
<body>
<div>
You must not be in CA (or other state with the vapor recovery gas pumps)=
.
</div>=20
<div class=3D"default-style">
All 13 gallons take forever for me, so I never try to go more than 9 or =
so.
</div>=20
<div class=3D"default-style">
Old cars don't have the on-board carbon canister system that is needed f=
or the new pumps.
</div>=20
<div class=3D"default-style">
So there is nothing you can do.
</div>=20
<div class=3D"default-style">
When the nozzle is fully inserted and gas pumped in the pressure rises a=
nd the pump shuts
</div>=20
<div class=3D"default-style">
off, always spilling gas down the side and onto the ground.
</div>=20
<div class=3D"default-style">
I have to hold the nozzle crooked so the bellows doesn't fully seat and =
just barely open the
</div>=20
<div class=3D"default-style">
trigger, takes forever.
</div>=20
<div class=3D"default-style">
Some guys hold the nozzle upside down (vertical) and it works better.&nb=
sp; I just tried this again
</div>=20
<div class=3D"default-style">
and it did seem to work better than years ago when I last tried it.
</div>=20
<div class=3D"default-style">
Gary
</div>=20
<div class=3D"default-style">
</div>=20
<div class=3D"default-style">
</div>=20
<blockquote type=3D"cite">=20
<div>
On 09/19/2023 2:16 PM PDT Greg Oliver <gregdawg89@hotmail.com> wr=
ote:
</div>=20
<div>
</div>=20
<div>
</div>=20
<div class=3D"elementToProof" style=3D"font-family: Calibri, Helvetica, =
sans-serif; font-size: 12pt; color: #000000;">
It does that with my Tiger too. <span id=3D"=F0=9F=99=81">=F0=9F=99=81<=
/span>
</div>=20
<div id=3D"appendonsend">
</div>=20
<hr style=3D"display: inline-block; width: 98%;" tabindex=3D"-1">=20
<div id=3D"divRplyFwdMsg" dir=3D"ltr">
<span style=3D"font-size: 11pt; color: #000000; font-family: Calibri, s=
ans-serif;"><strong>From:</strong> Tigers <tigers-bounces@autox.team.net=
> on behalf of Joel Martin via Tigers <tigers@autox.team.net><br><=
strong>Sent:</strong> Tuesday, September 19, 2023 1:53 PM<br><strong>To:</s=
trong> Tiger List Serve <tigers@autox.team.net><br><strong>Subject:</=
strong> [Tigers] Gas tank vent hose</span>=20
<div>
</div>=20
</div>=20
<div>=20
<div class=3D"x_yahoo-style-wrap" style=3D"font-family: garamond,new yo=
rk,times,serif; font-size: 16px;">=20
<div dir=3D"ltr" data-setdir=3D"false">
I have a ongoing issue, more of testing my patience, in that it takes=
me at least 5 minutes to completely fill my gas tanks. It takes the =
first 8-9 gallons just fine but the last 3-4 takes forever. I must sq=
ueak in .1-.2 gallons at a time, meaning I must wait 10-15 seconds for the =
gas to settle in the tanks before adding more.
</div>=20
<div dir=3D"ltr" data-setdir=3D"false">
</div>=20
<div dir=3D"ltr" data-setdir=3D"false">
The gas tank vent hose is in the correct location, I believe. N=
o gas fumes in trunk. Gas tank sending unit and gauge are pretty accu=
rate. When my patience holds and I get the tanks full, gauge shows 11=
.75 to 12 gallons on the gauge.
</div>=20
<div dir=3D"ltr" data-setdir=3D"false">
</div>=20
<div dir=3D"ltr" data-setdir=3D"false">
Any ideas or suggestions as to why this might be happening and potent=
ial fix would be appreciated.
</div>=20
<div dir=3D"ltr" data-setdir=3D"false">
</div>=20
<div dir=3D"ltr" data-setdir=3D"false">
Regards
</div>=20
<div dir=3D"ltr" data-setdir=3D"false">
</div>=20
<div dir=3D"ltr" data-setdir=3D"false">
Joel Martin
</div>=20
</div>=20
</div> _______________________________________________
<br>
<br>tigers@autox.team.net
<br>
<br>Donate: http://www.team.net/donate.html
<br>Archive: http://www.team.net/pipermail/tigers http://autox.team.net/=
archive
<br>
<br>Unsubscribe: http://autox.team.net/mailman/options/tigers/garywinbla=
d@comcast.net
<br>
<br>
<br>
</blockquote>
</body>
</html>
------=_Part_720085_1385300227.1695222437810--
--===============4516826627242786988==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
--===============4516826627242786988==--
|