Steve Laifman wrote:
> Tony,
>
> I bought a set of 3 lengths of 3/8 extensions with "arced" 3/8 "
> socket end tips that allowed the socket to tilt some. The shortest
> one removes those upper bolts on the bell housing from underneath very
> well. About $9 at Pep Boys.
>
> Works well with that rear spark plug, as well.
>
> Steve
>
> Tony Somebody wrote:
>
>>Rande- I have to wonder what gave you the idea the guy
>>standing in the engine bay was burley. It is a well
>>known and established fact he was a very small skinny
>>dude but he swung a very large mallet.He also used a
>>chisel to knock holes in the firewall, from the inside
>>, in order to reach the bell housing bolts. I have
>>that Mk1. regards, TTT
>>
>>
>--
>-----
>
>Steve Laifman
>Editor
>http://www.TigersUnited.com
>
--
-----
Steve Laifman
Editor
http://www.TigersUnited.com
|