It's more a question of how much free travel you have from pedal all the
way down until the clutch engages. Insufficient travel would mean that
the clutch would engage right off the bottom. If this is the case then
the clutch is still dragging a little bit.
Of course your clutch could be defective and doesn't release
completely. We usually didn't pay much attention to the pilot bushings,
sometimes we would put a dab of grease on them but we never soaked them
in oil.
> The fork had no play at the hinge joint when it was assembled. Any idea how
> much movement I should getting at the slave? When my wife was pushing the
> clutch pedal the clutch rod looked like it moved immediately.
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|