OK, so it took all afternoon, I was being carefull not to scratch any
paint or bump anything. Besides, I had to put the head on first and then
a lifter had poped out and I had to pull the cover and find the gasket
in a box in the basement. Still have to hook up a few small things. Then
change the diff if it comes apart easy enough. Should be able to fire it
up tomorrow and maybe take a drive Sunday, supposed to be near 80 degrees!
Any words of wisdom on pulling the axles and swapping the diff?
Thanks again
Dave & Bobbie
1960 Bugeye "Little Bits" (See link below)
http://members.bellatlantic.net/~vze2z49v/bugeye.htm
1960 AH3000 "Healey Bits"
1967 AH3000 "Not in Bits"
Pittsburgh Vintage Gran Prix (See link below)
http://www.pittsburghvintagegrandprix.com
|